19 Jun

Basement Insulation

Most people abandon their basements basement-insulation-leaving them to be cold, dark, damp and scary places. Basements suffer from a lot of flooding both as a result of rain and melting snow. The water from porous concrete blocks all drains into the basement making it wet and full of mold.

Basement insulation begins first with the sealing of the concrete floor to prevent water from draining into the basement. Through the installation of water extensive water gutters, the water can be directed far away from the foundation. Pools of water that collect after heavy rains can drain into the basement. Therefore, it is important to get rid of such puddles of water by laying down stones or dirt to ensure water flows away from the foundation.

Once you succeed in controlling the water outside the foundation then now you can move in and seal the basement walls from the inside. Waterproofing materials such as UGL DryLok will come in handy in brushing up the walls. The concrete pores will be filled as the DryLok dries and expands completely waterproofing the wall surfaces from water and moisture.

Selecting the best type of basement insulation
Controlling the flow of water can be a huge challenge if you do not select the most appropriate insulation material. Moisture control in the basement is very critical and you must plan for it. The choice of basement insulation materials will play a vital role in the moisture content management within the basement. You must choose insulation materials that can handle a considerable amount of dampness.

Foam Board Insulation is ideal for basements with the ability to handle high levels of moisture.Expanded Polystyrene (EPS) and Extruded Polystyrene (XPS) boards being semi-permeable allow the passage of moisture which prevents moisture build up on the wall and floors. The XPS boards are strong and durable for every inch.

You can either screw or glue the basement foam board to the foundation floor or walls directly. The seams in the middle of the foam insulation boards must be sealed using durable tapes. The gaps resulting from electrical and plumbing works must be sealed with spray foam to keep them airtight. The same insulation must be applied to the top and bottom of the wall. This airtight insulation all across the basement walls will regulate the moisture effectively.Check out the most affordable basement insulation at: Here

Rim Joists and Sill Plates Insulation
The sill plate and rim joist lie on the foundation wall and allow moisture into the basement through cracks and gaps, therefore the area has to be properly sealed. The rim joist is normally insulated using fiberglass however, fiberglass glass is not very effective at preventing moisture from seeping in. Instead use firm foam boards to insulate the rim joist by cutting an exact fit. Seal off completely using spray foam and finish off by running a professional bead along the foundation wall and the sill plate.
Take care of the plumbing, electrical wires, and heating ducts by using spray foam to cover them effectively.

Basement Finishing
You must take caution and cover the flammable foam board insulation with a fireproof barrier such as drywall. Framing a wall against the foam board is the right method of covering the insulation. It will also provide enough space for installing electrical cables and switches for lights. For basements in severe cold weather use fiberglass to fill up the wall cavities. Proceed with drywalling and complete the basement remodeling.
Check out this video on concrete insulation system at: Here


Leave a Reply

Your email address will not be published. Required fields are marked *